Perimeter Trim (Part #M001) is used for anchoring the outside perimeter of the
safety mat assembly to the floor and to run the mat wiring back to a location
near the mat controller. The unique wire raceway is built into the perimeter
trim and is supplied standard with all Part #M001 orders. The perimeter
trim adds 2.5” (64mm) to mat dimension per edge.
Ordering Procedure: Specify linear feet or dimensions followed by one
of the following:
TK: (picture frame trim kit)
M001: (bulk)
M001-M: (bulk/machined)
Custom Trim Kit: (consult factory)
Example: Part # 2442TK
A 24” x 42” mat with a 24” x 42” picture frame trim
kit; total area is 29” x 47”.
Active Coupler (Part #M003) is used whenever the mats are placed side to side or end to end. This will activate the "Active EdgingTM" feature which will eliminate dead zones between mats. The active coupler adds .25" (6.35mm) to the mat system’s overall dimension.
Ordering Procedure ­ Specify Part # and total length required in feet.
Built-In Wire Raceway (Part #M002). This innovative design concept provides excellent wiring protection for your safety mat system. The design provides an elevated off the floor wire raceway to protect the wiring and connections from fluids and caustic materials on the floor. It also provides a wiring harness to protect the mat wires from being pinched by improper perimeter trim installations commonly found in the industry.
The built-in raceway promotes individual homerun mat wiring back to the mat controller to ease installation and aid system troubleshooting diagnostics via the message display. The wire raceway provides enough space for six wire/plug assemblies to be run individually within the raceway back to the mat controller. The wire raceway component is supplied standard with the perimeter trim Part #M001.
ALL SAFETY MAT ASSEMBLIES ARE REQUIRED BY LAW TO BE "FIXED" IN PROPER LOCATION FOR MACHINE GUARDING APPLICATIONS
| Surface Metal Raceway Used to shield wire runs across the floor between the perimeter trim and the mat controller |
||
| Part Number | Item | Description |
| M005 | Base and Cover |  .040"
(1mm) galvanized steel. Base has 9/32" (7mm) diameter mounting holes on centers of approximately 8" (203mm) and is scored every 3" (76mm). Available in 10’ (3.05m) lengths. Wire Capacity - 1 to 4 Mat Wires |
| M006 | Base and Cover |  Cover:
.050" (1mm) galvanized steel.Base: .040" (1mm) galvanized steel. Base has 9/32" (7mm) mounting holes on centers of approximately 8" (203mm) and is scored every 3" (76mm). Available in 10’ (3.05m) lengths. Wire Capacity--5 to 8 Mat Wires |
| Ordering Procedure: Specify Part Number and total length required in feet. | ||
For detailed technical information on the MicroGuard® Safety Light Curtain and other Pinnacle Systems safety products download Installation Manuals.
To speak to a sales representative in the United States, please call (800) 569-7697.
Download
our PDF
STTS Safety Mat Brochure
