Theory of Operation | Blanking Options | Safety Relay | Specifications & Dimensions | Ordering Procedure | Accessories |

Pinnacle Systems, Inc.

The Model SS

Specifications and Dimensions

• Input Power: Emitter pylon: 24vdc @ .125A
Receiver pylon: 24vdc @ .125A (solid state outputs are PNP which may draw up to .25A additional)
• Internal fuses: Emiter Pylon: F1 @ 1A
Receiver Pylon: F1 @ 1A, F2 @ 1/2A, F3 @ 1/2A
• Outputs: Receiver pylon: monitored, 2 outputs, solid state PNP
(24vdc when GREEN, float when RED/off). Max .25A draw each.
• Indicators: Emitter pylon: Yellow, Red, Green.
Receiver pylon: Yellow, Red, Green.
• Construction: Painted aluminum extrusion with Acrylic IR lens and Viton Seals providing NEMA 12,13 protection.
Optional Polycarbonate tubes (sleeves) over the pylons provides NEMA 4 protection.
Cables are both 21’ (6.4m) long with a flexible in-line connector 12” (254mm) from the base of each pylon.
Emitter pylon: Four conductor 24AWG
Receiver pylon: Six conductor 24AWG
Pylons: Yellow
Cables: Black
• Temperature: 0 to 50c (up to 95% humidity, non-condensing)

 

 

  

• Dimensions: 1.45" (36.8mm) square X selected length (see tables for lengths)
• Beam Spacing & Minimum Object Sensitivity (MOS)
.5" (12.7mm) .
55" (14mm) MOS
1" (25.4mm)
1.18" (30mm) MOS
(special order, 4" active area followed by a 4" gap)
(special order, 4" active area followed by a 8" gap)
• Response Time and Scanning Frequency:
< 30 mSec total, 10 khz
• Shock: Tested to withstand high vibration (using shock mounts)
• Self-Checking: Every 15mSec
• Scanning distance
From 1’ to 20’ standard (1-6m)
From 21’ to 50’ (6-15m) extended range (optional)
The range is stated as a two digit number within the Model #
• Specials: Custom designed light curtains for special applications.
Consult factory.
• Surface Mount Technology
• One Year Warranty
• Made in USA

 

***Model SS ouput circuits must be used with either "control reliable" PLC input circuits, or a safety module. ***

Pylons with Fixed Mounting Brackets
Pylons with Swivel Mounting Brackets
Model
DIM A (In/mm)
DIM B (In/mm)
DIM C (In/mm)
DIM D (In/mm)
SS-04
3.50 / 89
7.20 / 183
5.35 / 136

8.20 / 208
SS-08
7.50 / 190
11.20 / 284
9.35 / 238
12.20 / 310
SS-12
11.50 / 292
15.20 / 386
13.35 / 339
16.20 / 411
SS-16
15.50 / 394
19.20 / 488
17.35 / 441
20.20 / 513
SS-20
19.50 / 495
23.20 / 589
21.35 / 542
24.20 / 615
SS-24
23.50 / 597
27.20 / 690
25.35 / 644
28.20 / 716
SS-28
27.50 / 698
31.20 / 792
29.35 / 745
32.20 / 818
SS-32
31.50 / 800
35.20 / 894
33.35 / 847
36.20 / 919
SS-36
35.50 / 902
39.20 / 996
37.35 / 949
40.20 / 1021
SS-40
39.50 / 1003
43.20 / 1097
41.35 / 1050
44.20 / 1123
SS-44
43.50 / 1105
47.20 / 1199
45.35 / 1152
48.20 / 1224
SS-48
47.50 / 1206
51.20 / 1300
49.35 / 1253
52.20 / 1326
SS-52
51.50 / 1308
55.20 / 1402
53.35 / 1355
56.20 / 1427
SS-56
55.50 / 1409
59.20 / 1504
57.35 / 1457
60.20 / 1529
SS-60
59.50 / 1511
63.20 / 1605
61.35 / 1558
64.20 / 1631
SS-64
63.50 / 1613
67.20 / 1707
65.35 / 1660
68.20 / 1732
(Incremental additives for longer pylons available)
Model
DIM A (In/mm)
DIM B (In/mm)
DIM C (In/mm)
DIM D (In/mm)
SS-04
3.50 / 89
7.93 / 201
5.35 / 136
8.93 / 227
SS-08
7.50 / 190
11.93 / 303
9.35 / 238
12.93 / 328
SS-12
11.50 / 292
15.93 / 405
13.35 / 339
16.93 / 430
SS-16
15.50 / 394
19.93 / 506
17.35 / 441
20.93 / 532
SS-20
19.50 / 495
23.93 / 608
21.35 / 542
24.93 / 633
SS-24
23.50 / 597
27.93 / 709
25.35 / 644
28.93 / 735
SS-28
27.50 / 698
31.93 / 811
29.35 / 745
32.93 / 836
SS-32
31.50 / 800
35.93 / 913
33.35 / 847
36.93 / 938
SS-36
35.50 / 902
39.93 / 1014
37.35 / 949
40.93 / 1040
SS-40
39.50 / 1003
43.93 / 1116
41.35 / 1050
44.93 / 1141
SS-44
43.50 / 1105
47.93 / 1199
45.35 / 1152
48.93 / 1224
SS-48
47.50 / 1206
51.93 / 1319
49.35 / 1253
52.93 / 1344
SS-52
51.50 / 1308
55.93 / 1421
53.35 / 1355
56.93 / 1446
SS-56
55.50 / 1409
59.93 / 1522
57.35 / 1457
60.93 / 1548
SS-60
59.50 / 1511
63.93 / 1624
61.35 / 1558
64.93 / 1649
SS-64
63.50 / 1613
67.93 / 1725
65.35 / 1660
68.93 / 1751
(Incremental additives for longer pylons available)

 

 

 

 

 

 

 

 

 

 

 
Extrusion: 1.45” square/37mm
A. Distance from first to last beam
B. Mounting hole distance
C. Length of extrusion
D. Overall length
Tolerance: +/- .10”/2.5mm		 Extrusion: 1.45” square/37mm
A. Guarded area (first to last beam)
B. Distance between mounting holes
C. Distance between mounting brackets
D. Total length (including brackets, but not cable)
Tolerance: +/- .10”/2.5mm

 


Sign Up For Frequent Product Announcements

Pinnacle Systems' Product Mix

Safety Light Curtains • Safety Mat Systems • Ergonomic Palm Buttons
Punch Press Automation Controls • Punch Press Guards and Controls
Press Brake Guards and Controls
Robotic, Automation and Special Machine Guarding Systems

All products are manufactured to meet or exceed all applicable OSHA and ANSI standards and are made in the U.S.A.
 

To speak to a sales representative in the United States, please call (800) 569-7697.

Request a catalog or price quote online or send an e-mail.