Safety Light Curtains, Safety Mats and Ergonomic Palm Buttons
Sales: (412) 262-3950  Service: (630) 443-8542



Ordering Procedure

Mat Controller
Example Part # A - 1 - 7 - 2 - 7






 A-Metal Box Controller. Mat Control and Message Display mounted in stand alone NEMA 12 lockable enclosure. 

B-Board only system supplied on a mounting back plate. Mat controller boards and message display to be installed into an existing control panel.

Mat Controller input power

1-110 VAC

2-220 VAC

3-24 VDC (24 VDC must be used for European Projects "CE")
Number of individual mats (inputs) to be wired back to STTS Mat Controller.

Specify quantity:
1 to 8
Number of isolated control zone (outputs) desired.

1- 1 Zone

2 - 2 Zones

3 - 3 Zones

4 - 4 Zones (requires larger control box), etc.
Optional mat plug receptacles mounted on the STTS Mat Controller. Receptacles require mats with wiring style "R."

Specify quantity: 1-8

 D-DIN-rail Controller

(24 VDC input power only)

 1 to 4

(1 zone output only)

(Remote Status Display, optional)

Mat Assembly
Example Part # N - Y - 60 - 96 - P - 20 - S








 Mat Style

  Mat Color

  Mat Width
Dimension "A"

  Mat Length
Dimension "B"

  Mat Wiring Style

  Mat Wire* Length


R-Ribbed Surface
N-Non-Skid Surface
H-High Temp Surface
(Excellent for weld splatter, molten plastic, die casting, forging operations, and wet environments)
12, 18, 24, 30, 36, 42, 48, 54, 60, 66, 72 12, 18, 24, 30, 36, 42, 48, 54, 60, 66, 72, 78, 84, 90, 96, 102, 108, 114, 120, 126, 132, 138, 144 W-Hard wire lead from mat to mat controller.
P-Plug connector at mat with hard wire lead to mat controller
R-Plug connector at mat with plug extension to mat controller receptacle (requires plug receptacle on mat controller)
W-For wire leads. Order in feet; 20’ feet supplied standard. Specify longer lengths if needed; 100’ maximum.
P-For plug connector mat with hard wire lead to mat controller. Order in feet; 20’ supplied standard. Extension lengths available: 10’, 15’, 20’, 25’, 50’.
R-Select plug extension length in feet. Lengths available include 10’, 15’, 20’, 25’.
S-Designates a special size, cut, contour, hole, notch, angle or wire exit location in the mat. Please submit drawing.

EXAMPLE — Part # N-Y-60-96-P-20 is a non-skid surface yellow mat 60” wide and 96” long with a plug connector. The plug extension is 20’ long and will terminate at the mat control box. Plug receptacle mounted on control panel optional. Refer to mat controller ordering procedure section.

*MAT WIRING — Individual mat homerun wiring or plug extensions back to the control box are required for easing installation and diagnostics for maintenance troubleshooting. This will eliminate cumbersome “daisy chain” wiring practices of mat systems. It also eliminates numerous wiring connection points buried under the perimeter trim which are time intensive to troubleshoot.

SPECIALS...The CustomatTM series
The ultimate customized mat system in the industry. Also available with the smart “Intelligent Matting™” capability. This series can provide customized mats, machine inlays, customized activation thresholds, wire exits, etc. Submit drawing and requirements to factory.


Email Sales
Quote Request

Email Service
Tech Support Request