HomeSafety LightsSafety MatsPalm ButtonsContact Us
Domestic and International Standards' Organizations

American National Standards Institute (ANSI)
25 West 43rd Street, 4th Floor
New York, NY 10036
PHONE (Domestic): (212) 642-4900
PHONE (Foreign/International): (212) 642-4995
FAX: (212) 398-0023
WEBSITE: www.ansi.org

Association for Manufacturing Technology (AMT)
7901 Westpark Drive
McLean, VA 22101-4269
PHONE: (703) 893-2900
FAX: (703) 893-1151
WEBSITE: www.mfgtech.org

ASME International
Three Park Avenue
New York, NY 10016-5990
PHONE: (800) 843-2763 (U.S/Canada)
(95) (800) 843-2763 (Mexico)
(973) 882-1167 (outside North America)
FAX: (212) 591-7674
WEBSITE: www.asme.org

American Society for Nondestructive Testing (ASNT)
1711 Arlingate Lane
Columbus, OH 43228-0518
PHONE: (800) 222-2768 or (614) 274-6003
FAX: (614) 274-6899
WEBSITE: www.asnt.org

American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
PHONE: (610) 832-9500
FAX: (610) 832-9555
WEBSITE: www.astm.org

British Standards Institution (BSI)
389 Chiswick High Road
London
W4 4AL
United Kingdom
PHONE: +44 (0)20 8996 9000
FAX: +44 (0)20 8996 7400
WEBSITE: www.bsi-global.com

Institute for Reference Materials and Measurements (IRRM)
European Commission Joint Research Centre
Institute for Reference Materials and Measurements
Retieseweg, B-2440 Geel, Belgium
PHONE: 32(0)14 571-272
FAX: 32(0)14 584-273
WEBSITE: www.irmm.jrc.be

Bureau Veritas Quality International (North America)
509 North Main Street
Jamestown, New York 14701
PHONE: (716) 484-9002
FAX: (716) 484-9003
WEBSITE: www.bvqi.com

Canadian Standards Association (CSA)
178 Rexdale Boulevard
Toronto, Ontario
M9W 1R3 CANADA
PHONE: (416) 747-4000 or (800) 463-6727
FAX: (416) 747-4149
WEBSITE: www.csa-international.org

Comite' Europeen de Normalisation (CEN)
36, rue de Stassart
B-1050 Brussels
PHONE: 32 2 550 08 11
FAX: 32 2 550 08 19
WEBSITE: www.cenorm.be

Comite' Europeen de Normalisation Electrotechnique (CENELEC)
Rue de Stassart, 35
B-1050 Brussels, Belgium
PHONE: (32) 2-519-6871
FAX: (32) 2-519-6919
WEBSITE: www.cenelec.org

Electronic Industries Alliance
2500 Wilson Boulevard
Arlington, VA 22201
PHONE: (703) 907-7500
FAX: (703) 907-7501
WEBSITE: www.eia.org

European Community Standards (EN)
Available from CEN, CENELEC, ANSI, and from Global Engineering Documents.

European Strategic Program for Research and Development in Information Technology (ESPRIT)
2300 M Street, NW, 3rd Floor
Washington, D.C. 20037
PHONE: (202) 862-9500
FAX: (202) 492-1766
WEBSITE: www.eurunion.org

Global Engineering Documents
15 Ienveress Way East
Englewood, CO 80112
PHONE: (800) 854-7179 or (303) 397-2695
FAX: (303) 397-2740
WEBSITE: www.global.ihs.com

Institute of Electrical and Electronic Engineers, Inc.
(IEE)
3 Park Avenue, 17th Floor
New York, NY 10016-5997
PHONE: (212) 419-7900
FAX: (212) 752-4929
WEBSITE: www.ieee.org

 

Institute of Environmental Sciences and Technology (IEST)
940 East Northwest Highway
Mount Prospect, Illinois 60056
PHONE: (847) 255-1561
FAX: (847) 255-1699
WEBSITE: www.iest.org

Instrument Society of America (ISA)
67 Alexander Drive
Research Triangle Park, NC 27709
PHONE: (919) 549-8411
FAX: (919) 549-8288
WEBSITE: www.isa.org

International Electrochemical Commission (IEC)
3, rue de Varembre'
P.O. Box 131
CH-1211 Geneva 20
Switzerland
PHONE: (41) 22-919-0211
FAX: (41) 22-919-0300
WEBSITE: www.iec.ch

International Organization for Standardization (ISO)
1, rue de Varembe'
Case Postale 56
CH-1211 Geneva 20
Switzerland
PHONE: (41) 22-749-0111
FAX: (41) 22-733-3430
WEBSITE: www.iso.ch

Manufacturers Standardization Society of the
Valve and Fitting Industry (MSS)
127 Park Street, NE
Vienna, VA 22180
PHONE: (703) 281-6613
FAX: (703) 281-6671
WEBSITE: www.mss-hq.com

National Conference of Standards Laboratories (NCSL)
1800 30th Street, Suite 305B
Boulder, Colorado 80301
PHONE: (303) 440-3339
FAX: (303) 440-3384
WEBSITE: www.ncslinternational.org

National Electrical Manufacturers Association (NEMA)
1300 North 17th Street
Suite 1847
Rosslyn, VA 22209
PHONE: (703) 841-3200
FAX: (703) 841-5900
WEBSITE: www.nema.org

National Fire Protection Association (NFPA)
1 Batterymarch Park
P.O. Box 9101
Quincy, MA 02269-9101
PHONE: (800) 344-3555
FAX: (617) 770-0700
WEBSITE: www.nfpa.org

National Institute of Standards and Technology (NIST)
US Department of Commerce
Semiconductor Electronics Division
Bldg. 225, Room B344
Gaithersburg, MD 20899
PHONE: (301) 975-2054
FAX: (301) 926-1630
WEBSITE: www.nist.gov

National Safety Council (NSC)
1121 Spring Lake Drive
Itasca, IL 60143-3201
PHONE: (630) 285-1121
FAX: (630) 628-1315
WEBSITE: www.nsc.org

Occupational Safety & Health Administration (OSHA)
United States Inquiries:
U.S. Department of Labor
Office of Public Affairs - Room N3647
200 Constitution Avenue
Washington, D.C. 20210
PHONE: (202) 693-1999

International Inquiries:
Jacquelyn DeMesme-Gray
OSHA Coordinator for International Affairs
U.S. Department of Labor
Occupational Safety & Health Administration
Division of International Affairs - Room N3641
200 Constitution Avenue
Washington, D.C. 20210
PHONE: (202) 693-2400

Robotics Industries Association (RIA)
900 Victors Way, P.O. Box 3724
Ann Arbor, MI 48106
PHONE: (734) 994-6088
FAX: (734) 994-3338
WEBSITE: www.roboticsonline.com

Society of Automotive Engineers, Inc. (SAE)
SAE World Headquarters
400 Commonwealth Drive
Warrendale, PA 15096-0001
PHONE: (724) 776-4841
FAX: (724) 776-5760
WEBSITE: www.sae.org

Underwriters Laboratories, Inc. (UL)
333 Pfingsten Road
Northbrook, IL 60062-2096
PHONE: 847-272-8800
FAX: 847-728-8219
WEBSITE: www.ul.com

NOTE: Standards listed here and referenced on pinnaclesystems.com are subject to frequent change and revision by their issuing organizations. Check with OSHA and ANSI for the most recent standards for your application.

Pinnacle Systems' Product Mix

Safety Light Curtains • Safety Mat Systems • Ergonomic Palm Buttons
Punch Press Automation Controls • Punch Press Guards and Controls
Press Brake Guards and Controls
Robotic, Automation and Special Machine Guarding Systems

All products are manufactured to meet or exceed all applicable OSHA and ANSI standards and are made in the U.S.A.